When Sacramento temperatures soar past 100°F, you need an HVAC system that won’t quit. Our professional installations deliver consistent cooling to every room, eliminating those frustrating hot spots that plague so many local homes.
You’ll notice the difference immediately. No more sweating in the bedroom while the living room feels like an icebox. No more sky-high energy bills that make you cringe every month. Just reliable, even comfort that works exactly when you need it most.
With Sacramento’s electricity rates running 88% higher than the national average, a properly installed energy-efficient system pays for itself through lower utility costs. Many of our customers see their cooling expenses drop by half or more.
We at Hot & Cold HVAC understand what Sacramento homeowners face. We’ve been installing and servicing HVAC systems throughout Southside Park, Citrus Heights, Roseville, and the greater Sacramento area for years.
Our technicians know how Sacramento’s unique climate affects your home. Those brutal 116-degree summer days. The mild winters that make heat pumps incredibly efficient here. The pressure balance issues that older Sacramento homes often develop.
Every installation comes with our lifetime repair guarantee because we stand behind our work. We’re not here to sell you the most expensive system – we’re here to install the right system for your home and budget.
Your installation starts with proper system sizing. We calculate your home’s exact cooling and heating needs, factoring in square footage, insulation, and Sacramento’s climate demands. No guesswork, no oversized units that waste energy.
Next comes the installation itself. Our certified technicians handle everything from removing your old system to installing new ductwork if needed. We protect your floors and furniture, work efficiently, and clean up completely when we’re done.
Before we leave, we test every component to ensure optimal airflow and temperature control. You’ll get a complete walkthrough of your new system, plus all warranty information and maintenance recommendations. Most installations complete within one to three days, depending on complexity.
Ready to get started?
Your HVAC installation includes professional system sizing, complete equipment installation, and thorough testing. We handle all permits and inspections required by Sacramento County, so you don’t have to worry about compliance issues.
Sacramento homeowners often qualify for significant rebates. SMUD offers up to $2,500 in rebates for energy-efficient heat pump systems. California’s new rebate program provides up to $8,000 for qualifying homeowners. We’ll help you navigate these programs to maximize your savings.
We also address common Sacramento-area issues during installation. Proper duct sealing to prevent the 40% energy loss that plagues many local homes. Correct airflow balancing to eliminate hot and cold spots. Indoor air quality improvements to reduce allergens that affect so many residents here.
HVAC installation costs in Sacramento typically range from $6,500 to $13,000, depending on your system size and efficiency rating. A standard 3.5-ton, 16 SEER system costs between $6,465 and $7,793 including professional installation.
Several factors affect your final cost. Larger homes need bigger systems. Higher efficiency ratings cost more upfront but save money long-term through lower energy bills. If your ductwork needs replacement or modification, that adds $2,100 to $4,000 for a typical 2,000 square foot home.
The good news is Sacramento homeowners have access to substantial rebates. SMUD offers up to $2,500 for qualifying heat pump installations. California’s new rebate program provides up to $8,000 for income-qualified homeowners. These rebates can significantly reduce your out-of-pocket costs.
Most Sacramento homes need between 2.5 to 4 tons of cooling capacity, depending on square footage, insulation, and sun exposure. A typical 1,800 square foot home requires about 3.5 tons, while smaller homes under 1,500 square feet often need 2.5 tons.
Sacramento’s hot summers demand adequate cooling capacity, but oversizing creates problems. An oversized system cycles on and off frequently, wastes energy, and fails to remove humidity properly. It also costs more to purchase and operate.
Professional load calculations factor in your home’s specific characteristics. Window orientation, insulation levels, ceiling height, and even local microclimate conditions around your property. We perform these calculations for every installation to ensure optimal performance and efficiency.
Most HVAC installations in Southside Park take one to three days to complete. Straightforward replacements where existing ductwork is in good condition typically finish in one day. More complex installations requiring ductwork modifications or electrical upgrades may take two to three days.
Several factors influence installation time. If we’re replacing an existing system with similar equipment, installation goes faster. New construction or major ductwork changes take longer. We also need time for proper testing and county inspections.
We’ll provide a realistic timeline during your estimate. Sacramento County requires inspections for new installations, which we schedule and coordinate. Our goal is completing your installation quickly without rushing the quality that ensures years of reliable operation.
Heat pumps work exceptionally well in Sacramento’s climate. Our mild winters with temperatures rarely dropping below freezing make heat pumps incredibly efficient for heating. Modern multi-stage heat pumps heat and cool extremely well in Sacramento’s conditions.
Sacramento’s climate is actually ideal for heat pump operation. Unlike colder regions where heat pumps struggle in winter, our moderate temperatures allow heat pumps to operate efficiently year-round. You get both heating and cooling from one system.
Energy savings are substantial. Heat pumps can cut your heating costs by 50% compared to traditional furnaces. With Sacramento’s high electricity rates, these savings add up quickly. Plus, heat pumps qualify for the best rebates available through SMUD and state programs.
Sacramento homeowners have access to multiple rebate programs that can save thousands on HVAC installation. SMUD offers up to $2,500 in rebates for qualifying multi-stage heat pump systems. Federal tax credits provide up to 30% of project costs, capped at $2,000.
California’s new Home Electrification and Appliance Rebates program offers the biggest savings. Homeowners with incomes between 80% and 150% of area median income qualify for up to $4,000. Those with lower incomes can receive up to $8,000 in rebates.
These rebates can stack with other incentives for maximum savings. We help you navigate the application process and ensure your system qualifies for all available programs. The paperwork can be complex, but the savings are worth it – many customers reduce their installation costs by $3,000 to $8,000.
Yes, we handle all permits and inspections required for HVAC installation in Sacramento County. This includes pulling the initial permit, scheduling required inspections, and ensuring your installation meets all local codes and regulations.
Sacramento County requires inspections for new HVAC installations to ensure safety and proper installation. We coordinate with county inspectors and handle any issues that arise. You don’t need to take time off work or deal with bureaucratic processes.
Our installations consistently pass inspection on the first attempt because we follow all code requirements from the start. We’ve worked with Sacramento County inspectors for years and understand exactly what they look for. This saves you time and prevents installation delays.
Local Resources
Useful Links
Other Services we provide in Southside Park
