Sacramento summers hit 92 degrees on average. Your home should be your refuge from that heat, not another place where you’re sweating through your clothes.
When we install your new HVAC system, you get immediate relief from those brutal California temperatures. No more lying awake at night because it’s too hot. No more avoiding certain rooms in your house during the day.
You’ll also see the difference on your energy bills. Modern high-efficiency systems use significantly less electricity than older units, which matters when California’s electric rates are 88% higher than the national average. Many of our customers save hundreds of dollars annually after upgrading their systems.
We’ve been serving Paintersville, Sacramento, Roseville, Rocklin, and Citrus Heights for years. We’re not just another contractor who showed up yesterday—we understand how Sacramento’s climate affects your home.
We’ve seen what happens when systems are sized wrong for our hot summers. We know which brands hold up best in our conditions. And we understand that when your AC breaks down in July, you need someone who can respond the same day, not next week.
Our technicians are trained on the latest energy-efficient systems, and we’ll help you navigate the rebate programs that can put thousands of dollars back in your pocket. Because we’re local, we know exactly which incentives apply to Sacramento County residents.
First, we’ll assess your home’s specific needs. Sacramento homes vary widely—from older houses in Midtown to newer developments in Roseville—and each requires a different approach. We’ll calculate the right system size based on your square footage, insulation, and how your home is oriented to the sun.
Next, we handle the installation with minimal disruption to your daily routine. Most residential installations take one day, and we clean up completely when we’re done. We test everything thoroughly before we leave to make sure your system is running at peak efficiency.
Finally, we walk you through your new system and help you apply for available rebates. Right now, Sacramento area homeowners can qualify for up to $10,500 in combined federal tax credits, state rebates, and SMUD incentives. We’ll make sure you don’t leave money on the table.
Ready to get started?
Your installation includes everything needed for reliable operation: the outdoor unit, indoor air handler or furnace, refrigerant lines, electrical connections, and thermostat setup. We also handle any necessary ductwork modifications to ensure proper airflow throughout your home.
For Sacramento area homes, we typically recommend systems with SEER ratings of 16 or higher. These high-efficiency units qualify for the maximum available rebates and provide the best long-term savings given our high electricity costs. Heat pump systems are particularly effective in our climate since they provide both heating and cooling.
We work with leading brands that perform well in California’s conditions and offer strong warranties. Every installation includes a thorough system commissioning to verify proper operation, refrigerant levels, and airflow. You’ll also receive documentation needed for rebate applications and warranty registration.
HVAC installation in the Sacramento area typically ranges from $6,500 to $15,000, depending on your system size and efficiency level. A standard 3-ton system for an average-sized home usually costs between $8,000 and $12,000 installed.
However, current rebates can significantly reduce your out-of-pocket costs. Sacramento area homeowners can qualify for up to $2,500 from SMUD, $2,000 in federal tax credits, and potentially $8,000 in state rebates depending on income level. We help you navigate these programs to maximize your savings.
The exact cost depends on your home’s specific requirements, including ductwork needs, electrical upgrades, and system efficiency level. We provide detailed estimates that break down all costs upfront, so you know exactly what to expect.
In Sacramento’s Climate Zone 4, most homes need larger systems than the national average due to our hot summers. A typical 1,800 square foot home usually requires a 3.5-ton system, but the exact size depends on several factors beyond square footage.
We consider your home’s insulation levels, window efficiency, ceiling height, and orientation to the sun. Older homes with single-pane windows or poor insulation may need larger systems, while well-insulated newer homes can often use smaller, more efficient units.
Proper sizing is critical—an oversized system cycles on and off too frequently, wasting energy and creating humidity problems. An undersized system runs constantly and never achieves comfortable temperatures. We perform detailed load calculations to determine the optimal size for your specific home and comfort needs.
Most residential HVAC installations in the Sacramento area take one full day, typically 6-8 hours. Straightforward replacements where we’re swapping out an existing system usually finish faster, while installations requiring new ductwork or electrical upgrades may take longer.
We schedule installations to minimize disruption to your routine. Our crews arrive early, work efficiently, and clean up completely before leaving. If your installation requires multiple days, we’ll make sure you have temporary cooling if needed, especially during Sacramento’s hot summer months.
Weather rarely delays installations here since we have so many clear days, but we do avoid working during extreme heat warnings when it’s unsafe for our technicians. We’ll reschedule if necessary and prioritize emergency situations where customers have no cooling at all.
Sacramento area homeowners have access to some of the best HVAC rebates in the country. SMUD offers up to $2,500 for qualifying heat pump systems. The federal government provides tax credits up to $2,000 for high-efficiency equipment. California’s HEEHRA program offers income-qualified rebates up to $8,000.
You can often stack these incentives together, potentially saving over $10,000 on your installation. The key is using qualified contractors and equipment that meets specific efficiency requirements. We’re familiar with all current programs and help you apply for every rebate you qualify for.
Rebate programs change regularly, and some have limited funding that runs out during the year. We stay current on all available incentives and will let you know exactly what’s available when you’re ready to install. The sooner you act, the more likely you are to secure maximum savings.
Heat pumps are excellent choices for Sacramento’s climate. They provide both heating and cooling, work efficiently in our mild winters, and qualify for the highest rebates available. Most of our customers save money compared to separate AC and heating systems.
Modern heat pumps aren’t like the older models that had performance issues. Today’s variable-speed heat pumps maintain consistent temperatures and operate much more quietly than traditional systems. They’re also better for the environment since they use electricity instead of natural gas for heating.
The main consideration is your current heating setup. If you have an older gas furnace that still works well, a traditional AC might make sense initially. But if you’re replacing both heating and cooling equipment, a heat pump system usually provides better long-term value and qualifies for more rebate money upfront.
We offer same-day service for emergency situations, especially during Sacramento’s peak summer months when AC failures can be dangerous. If your system breaks down completely and you have vulnerable family members, young children, or health conditions affected by heat, we prioritize your call.
Same-day installations are possible for straightforward replacements where we’re swapping similar equipment and no additional work is needed. However, most installations benefit from proper planning, including load calculations, permit processing, and ensuring we have the right equipment sized for your home.
For non-emergency installations, we typically schedule within 2-3 days during busy season and often next-day during slower periods. We maintain good inventory of popular system sizes and can usually accommodate urgent requests when customers need new systems quickly due to complete failures or other pressing circumstances.
Local Resources
Useful Links
Other Services we provide in Paintersville
