You’ll walk into a home that feels exactly how you want it to feel. No more sweating through July nights or cranking up the heat bill in January. No more wondering if your system will quit when you need it most.
The difference shows up immediately. Your energy bills drop because the system actually fits your home’s needs. The temperature stays consistent room to room instead of creating hot and cold spots that make you constantly adjust the thermostat.
Most importantly, you’ll have peace of mind knowing a licensed California contractor installed everything according to code, with warranties that actually mean something and maintenance schedules that keep everything running smoothly for years.
Hot & Cold HVAC has been handling HVAC installations in Florin and the greater Sacramento area, understanding exactly what works in our unique climate. We’re not some fly-by-night operation trying to sell you the most expensive system on the truck.
Our technicians are California state licensed, bonded, and insured because that’s what the law requires and what you deserve. We’ve seen what happens when systems aren’t properly sized for Florin’s extreme summer heat or when contractors cut corners on installation.
The Central Valley climate is tough on HVAC systems. We design installations that handle those 100-degree summer days without breaking your budget, while still providing efficient heating during our mild but sometimes surprisingly cold winters.
First, we come to your home and actually measure everything. Not just square footage, but ceiling height, insulation quality, window placement, and how your home handles heat. This determines the right system size because an oversized unit cycles on and off wastefully, while an undersized unit runs constantly without keeping you comfortable.
Next, we provide a written estimate that covers labor, materials, permits, and any potential complications we can see upfront. No surprises, no hidden fees, no pressure to decide immediately.
Installation typically takes one to three days depending on your home’s layout and whether we need to modify ductwork. We remove your old equipment, install the new system, test everything thoroughly, and clean up completely. You’ll know how to operate your new system and have our contact information for any questions that come up later.
Ready to get started?
Your installation includes proper system sizing based on your home’s specific needs, not just a generic calculation. We account for Florin’s climate patterns, your home’s orientation, and how efficiently your current ductwork distributes air.
All installations meet California’s strict energy efficiency standards and qualify for available rebates. SMUD offers up to $2,000 in rebates for energy-efficient heat pumps, and we help you navigate the paperwork to maximize your savings.
We provide comprehensive warranties on both equipment and our installation work. Your system comes with manufacturer warranties, and our installation carries additional protection because we stand behind our work. Regular maintenance scheduling keeps your warranty valid and your system running efficiently through Sacramento’s demanding climate conditions.
Most HVAC installations in Florin take one to three days from start to finish. Simple replacements where we’re swapping out similar equipment can often be completed in a single day. More complex installations involving ductwork modifications, electrical upgrades, or challenging access areas may require two to three days.
The timeline depends on your home’s specific situation. Older homes sometimes need electrical panel upgrades to handle modern high-efficiency systems. Homes with crawl space or attic access issues take longer because we need to work more carefully. We’ll give you an accurate timeline estimate during our initial consultation so you can plan accordingly.
Weather rarely delays indoor installation work, but we won’t start outdoor unit installation during extreme heat advisories for our technicians’ safety.
For a typical 2,000-square-foot Florin home, you’ll need a furnace between 50,000 and 80,000 BTUs and an air conditioning unit with 2.5 to 5 tons of capacity. However, Florin’s climate means you’ll likely need cooling capacity on the higher end of that range due to our intense summer heat.
But square footage alone doesn’t determine system size. We calculate heating and cooling loads based on your home’s insulation quality, window efficiency, ceiling height, and orientation to the sun. A well-insulated home with newer windows needs a smaller system than a similar-sized home with poor insulation and old single-pane windows.
Proper sizing is crucial because oversized systems waste energy by cycling on and off frequently, while undersized systems run constantly without maintaining comfortable temperatures. We use professional load calculation software to get this right the first time.
HVAC installation costs in the Florin and Sacramento area typically range from $5,000 to $13,000, depending on the system type, size, and installation complexity. Basic central air and furnace combinations for average-sized homes start around $5,000, while high-efficiency systems with advanced features can reach $13,000 or more.
Several factors affect the final cost: the brand and efficiency rating you choose, whether existing ductwork needs modification, electrical upgrades required for new equipment, and permit fees. Heat pump installations often qualify for SMUD rebates up to $2,000, which can significantly reduce your out-of-pocket costs.
We provide written estimates that break down all costs upfront, including labor, materials, permits, and any additional work needed. Many customers use our financing options to spread costs over time, with some programs offering 0% interest for qualified buyers.
Yes, we inspect and service existing ductwork as part of every installation. California requires ductwork to meet strict efficiency standards, with less than 1% leakage for optimal performance. We test your current ductwork and seal any leaks we find to ensure your new system operates at peak efficiency.
Sometimes ductwork modifications are necessary to accommodate new equipment or improve airflow to certain rooms. We might need to resize ducts, add new return air pathways, or install dampers for better temperature control. All modifications are included in our written estimate so there are no surprises.
Older homes often have ductwork that was sized for less efficient equipment. We evaluate whether your existing ducts can handle the airflow requirements of modern high-efficiency systems and recommend upgrades when necessary to prevent reduced performance and higher energy bills.
Your new HVAC system needs professional maintenance twice a year, ideally in spring before cooling season and fall before heating season. This preventive maintenance catches small issues before they become expensive repairs and keeps your system running efficiently through Florin’s extreme temperature swings.
During maintenance visits, we clean and inspect all components, check refrigerant levels, test safety controls, and verify proper airflow throughout your home. We also replace filters, lubricate moving parts, and calibrate your thermostat for optimal performance. Regular maintenance typically extends equipment life by several years and keeps energy bills lower.
Between professional visits, you should change filters regularly (usually monthly during heavy use periods), keep outdoor units clear of debris, and watch for unusual noises or performance changes. We provide maintenance reminders and priority scheduling for our installation customers.
Yes, all our HVAC contractors are licensed by the California Contractors State License Board (CSLB) as required by state law. California requires HVAC contractors to have four years of experience, maintain proper bonding, and carry insurance when they have employees. We meet all these requirements and maintain current licensing.
Our technicians receive ongoing training on the latest HVAC technologies and California energy efficiency standards. This ensures your installation meets current codes and qualifies for available rebates and incentives. We also stay current on local permit requirements and handle all necessary paperwork for your installation.
You can verify any contractor’s license status through the CSLB website. We’re happy to provide our license number and proof of insurance before beginning any work. This protects both you and us, ensuring your installation is done legally and professionally.
Local Resources
Useful Links
Other Services we provide in Florin
