You wake up to a cold house on a January morning when it’s 39 degrees outside. Your furnace isn’t kicking on. You’ve got work in an hour and kids who need to get ready for school.
This is when you need a heating contractor who picks up the phone, gives you a straight answer about timing and cost, and shows up with the parts to fix it. Not someone who schedules you three days out or tacks on mystery charges after the work’s done.
Our techs arrive in fully stocked trucks because most furnace repairs in Penryn involve the same handful of issues—igniters that fail, thermostats that lose calibration, or filters clogged with foothill dust and wildfire residue. We fix it during the first visit in most cases. You get heat back the same day, and you know exactly what you’re paying before we start.
Hot & Cold HVAC serves both Sacramento and Placer counties, which means we’re already familiar with what furnaces face in the Sierra foothills. The temperature swings between day and night. The dust that settles during dry months. The strain on systems during cold snaps that last longer than forecasts predict.
Every tech on our team is licensed and insured. We carry liability coverage because we’re working in your home, and you deserve that protection. We also offer 24/7 emergency service during extreme weather, because a broken furnace in January isn’t something you can wait on.
We don’t oversell. If your furnace needs a $150 part, we’re not pitching you a $6,000 replacement. If it does need replacing, we’ll explain why and show you the numbers that support it.
You call or text us at (916) 519-1248. We ask a few questions about what’s happening—no heat, strange sounds, pilot light issues—and we give you a timeframe. For emergencies, that’s usually same-day.
Our tech arrives in a truck stocked with the most common furnace parts. They run diagnostics to figure out what failed and why. Then they walk you through what’s wrong, what it costs to fix, and how long it’ll take. You approve the work before we touch anything.
Most heater repair jobs in Penryn take one to two hours. If it’s something like a cracked heat exchanger that requires ordering a part, we’ll let you know upfront and get it scheduled. After the repair, we test the system to make sure it’s heating properly and efficiently. You’re not paying for a callback a week later because the fix didn’t hold.
Ready to get started?
When we repair your furnace, you’re getting a full system check—not just a patch on the obvious problem. We inspect the igniter, burners, heat exchanger, blower motor, and thermostat calibration. If your filter is clogged with dust or smoke residue, we’ll replace it or recommend the right one for your system.
Penryn’s climate is tough on heating systems. You get cold, wet winters that put stress on components, and then long stretches of disuse during summer when seals dry out and parts corrode. We see a lot of furnaces that fail right at the start of heating season because they sat idle for months. A tune up before winter prevents most of those breakdowns.
We also help Penryn homeowners navigate rebates and tax credits. If your furnace is old and inefficient, replacing it with a high-efficiency model or heat pump can cut your energy bills significantly. SMUD offers rebates for qualifying systems, and federal tax credits are available for heat pump installations. With California planning to ban new gas furnaces by 2030, switching now puts you ahead of the mandate and saves you money in the meantime.
Most furnace repairs in Penryn run between $150 and $500, depending on what failed. A simple fix like replacing a flame sensor or thermostat is on the lower end. If your blower motor or gas valve needs replacing, you’re looking at $300 to $500.
We give you upfront pricing before we start the work. You’ll know exactly what the repair costs, and there are no surprise charges after we’re done. If your furnace is older than 15 years and needs a major repair, we’ll also give you the cost of replacement so you can compare and make the call that makes sense for your situation.
Emergency service during nights or weekends may include a trip fee, but we’ll tell you that when you call. Most standard repairs during business hours don’t carry extra fees.
Most furnace repairs take one to two hours once our tech arrives. If it’s a straightforward issue like a bad igniter, clogged filter, or tripped breaker, we’re usually done in under an hour.
More involved repairs—like replacing a blower motor or control board—can take two to three hours. If we need to order a part that’s not in the truck, we’ll schedule a follow-up visit and give you a timeline for when the part arrives. That’s rare, but it happens with older or less common furnace models.
For emergency calls, we prioritize same-day service. If you call in the morning, we’re often there by early afternoon. If you call late in the day, we do our best to get someone out before evening, especially if it’s cold outside and you’ve got no heat.
The most common issue we see in Penryn is a failed igniter. When your furnace won’t start and you hear the blower running but no heat, it’s usually the igniter. They wear out over time, especially in systems that cycle on and off frequently during mild winters.
Clogged filters are another big one. Penryn gets dust from the foothills and smoke during wildfire season. If you’re not changing your filter every one to two months, it restricts airflow and makes your furnace work harder. That leads to overheating and premature failure of other components.
Thermostat issues are also common. If your furnace short-cycles or doesn’t reach the temperature you set, the thermostat might be miscalibrated or installed in a spot that doesn’t reflect your home’s actual temperature. We also see a lot of pilot light problems in older gas furnaces, usually caused by a dirty pilot orifice or a failing thermocouple.
If your furnace is less than 10 years old and the repair costs less than $500, fixing it usually makes sense. You’ll get several more years out of the system, and the repair pays for itself in avoided replacement costs.
If your furnace is 15 years or older and needs a major repair—like a cracked heat exchanger or failed blower motor—replacement is often the better move. At that age, you’re likely to face more repairs in the next few years, and your energy bills are higher because older furnaces are less efficient.
We’ll give you both options with real numbers. If a repair costs $400 but your furnace is 18 years old, we’ll also quote you a replacement cost so you can see the full picture. With California banning new gas furnaces by 2030 and energy costs climbing, switching to a high-efficiency heat pump now can save you 30% to 40% on heating bills and qualify you for rebates that offset the upfront cost.
Yes. We offer 24/7 emergency heating repair in Penryn and throughout Placer County. If your furnace goes out in the middle of the night or during a cold snap, you can call or text us at (916) 519-1248, and we’ll get someone out as quickly as possible.
During extreme weather, we prioritize emergency calls because we know a broken furnace isn’t just uncomfortable—it can be unsafe, especially if you have young kids or elderly family members in the house. Our techs carry the most common parts in their trucks, so most emergency repairs get resolved during the first visit.
Emergency service may include a trip fee depending on the time and day, but we’ll tell you that upfront when you call. There are no hidden charges, and you’ll know the full cost before we start the repair.
You should schedule a furnace tune up once a year, ideally in late summer or early fall before you start using your heat regularly. Annual maintenance catches small issues before they turn into expensive repairs and keeps your system running efficiently.
During a tune up, we clean the burners, check the heat exchanger for cracks, test the igniter and flame sensor, inspect the blower motor, and replace the filter if needed. We also calibrate your thermostat and check for any airflow restrictions caused by dust or debris.
Regular maintenance extends your furnace’s lifespan by up to 25% and reduces the chance of a mid-winter breakdown by around 90%. It also keeps your energy bills lower because a well-maintained furnace doesn’t have to work as hard to heat your home. In Penryn, where dust and wildfire smoke can clog filters faster than in other areas, staying on top of maintenance makes a real difference.
Local Resources
Useful Links
Other Services we provide in Penryn
