When your furnace quits on a cold night, you don’t need a sales pitch. You need someone who picks up the phone, shows up when they say they will, and fixes the problem without turning it into a replacement conversation you didn’t ask for.
That’s what happens when you call Hot & Cold HVAC. Most repairs get done the same day because our trucks carry the parts that actually fail in Sacramento County’s climate—blower motors, igniters, flame sensors, and thermocouples for every major brand. You’re not waiting three days for a part to ship while your family bundles up indoors.
You’ll know the price before work starts. No “diagnostic fees” that turn into pressure tactics. No surprise charges after the fact. Just a clear explanation of what’s broken, what it costs to fix, and what happens if you do nothing. Then you decide.
Hot & Cold HVAC operates throughout Sacramento and Placer counties with fully licensed, insured technicians who’ve seen what breaks in this area. We’re not a national franchise with rotating crews—we’re local heating contractors who know that Elverta’s dusty air clogs filters faster, and that mild winters make people skip maintenance until something fails.
We’ve been fixing furnaces, heat pumps, and boilers across Elverta, Antelope, Rio Linda, and North Highlands long enough to recognize the systems in your neighborhood. Most homes here run Carrier, Trane, Rheem, Lennox, or Goodman units, and we service all of them without pushing you toward one brand or another.
You can text us at 916-519-1248 if that’s easier than calling. We’ll respond either way, usually within the hour.
You call or text describing the problem—no heat, strange noises, high bills, burning smells, whatever’s going on. We ask a few questions to understand urgency and sometimes walk you through a quick check to see if it’s something simple like a tripped breaker or thermostat setting.
If you need a tech, we schedule same-day service for most calls in Elverta and surrounding areas. Emergency situations—complete heat loss, gas smells, carbon monoxide concerns—get priority response, typically within two to four hours.
Our technician arrives in a fully stocked truck, diagnoses the issue, and explains what’s wrong in plain terms. You get an upfront price that includes parts and labor. If you approve, we fix it. Most repairs finish the same visit because we carry common failure parts for Sacramento County systems.
After the repair, we test the system, check safety components, and make sure your heat works properly. You get a clear invoice matching the quote, and we’re available if anything seems off afterward.
Ready to get started?
Every furnace repair starts with a full system diagnostic—not just the obvious problem. We check the heat exchanger for cracks, test for carbon monoxide leaks, inspect the burner assembly, verify proper airflow, and measure temperature rise to confirm your system heats efficiently and safely.
In Sacramento County, dust and particulate pollution stress HVAC systems harder than in coastal areas. We clean flame sensors and burners even during repair calls because dirty components cause most repeat failures here. Your blower motor gets inspected for wear, and we check capacitors before they fail and leave you without heat.
You’ll see what we found, what we fixed, and what might need attention soon—but we don’t manufacture urgency. If your 20-year-old furnace runs fine after a $200 repair, we’ll tell you to keep using it. If it’s on its last legs and you’re looking at a $600 fix on a system worth $400, we’ll say that too.
Elverta homeowners often ask about heat pumps during repair calls because SMUD offers substantial rebates—sometimes $3,000 to $4,000 for gas-to-electric conversions. We’ll explain whether that makes sense for your situation, but we’re not here to sell you something that doesn’t fit your budget or timeline.
Most furnace repairs in the Sacramento area run between $150 and $500 depending on what failed. Simple fixes like replacing a flame sensor, thermocouple, or igniter typically cost $150 to $250 including parts and labor. Blower motor replacements, control board issues, or gas valve problems usually fall in the $300 to $500 range.
You’ll get an exact price before any work starts. We don’t charge separately for diagnostics if you approve the repair—the trip fee covers our time to identify the problem, and that gets applied to the repair cost if you move forward.
Emergency calls outside normal hours cost more, but we’re upfront about that when you call. If you’re dealing with no heat and it’s 10 PM on a Saturday, you’ll know the after-hours rate before we dispatch a tech. For most people, paying an extra $75 to $100 beats spending the night in a cold house.
For true emergencies in Elverta—no heat, gas smells, carbon monoxide detector going off—we typically arrive within two to four hours of your call. We prioritize homes with young children, elderly residents, or anyone with health conditions that make cold temperatures dangerous.
Same-day service is standard for most calls across Sacramento County, even non-emergencies. If you call before noon on a weekday, there’s a strong chance we’ll have a tech at your door that afternoon. Weekends get busier, but we staff accordingly because furnace problems don’t wait for Monday.
We serve a large area—Sacramento, Placer, and parts of surrounding counties—so response times vary slightly by location. Elverta, Antelope, North Highlands, and Rio Linda are all within our primary service zone, which means faster response than outer areas. When you call, we’ll give you a realistic arrival window, not a vague “sometime today” promise.
If your furnace is under 12 years old and the repair costs less than a third of replacement cost, fix it. A $400 repair on a seven-year-old system that should last another decade makes sense. That same $400 repair on a 22-year-old furnace that’s already had multiple fixes? You’re probably better off replacing it.
The break-even point usually hits around 15 years for gas furnaces in Sacramento County. Well-maintained systems can push 20 to 25 years, but most start having repeated failures after 15. If you’re facing a major repair—heat exchanger crack, full blower assembly, compressor on a heat pump—and your system is in that age range, replacement often makes more financial sense.
We’ll walk you through the math honestly. If repairing makes sense, we’ll fix it and get you through another few years. If you’re throwing good money after bad, we’ll tell you that too and explain your replacement options without pressure. Some contractors push new systems regardless of circumstances—we don’t operate that way.
Dirty flame sensors cause more no-heat calls than anything else in Sacramento County. Dust and particulates in our air coat the sensor, preventing it from detecting the flame, so the furnace shuts down as a safety measure. Cleaning takes ten minutes and costs around $150 for a service call.
Igniter failures run a close second, especially on furnaces that sit unused for months during our mild falls and springs. When you finally need heat in late November or December, the igniter cracks from thermal stress and won’t light the gas. Replacement runs $175 to $250 depending on the furnace model.
Blower motors wear out faster here because systems run year-round—cooling in summer, heating in winter, and often fan-only mode during shoulder seasons for air circulation. Capacitors fail first, then the motor itself. You’ll hear grinding, squealing, or notice weak airflow before it quits completely. Catching it early saves money because a $150 capacitor replacement beats a $450 motor replacement.
Thermostat issues cause a surprising number of service calls that aren’t actually furnace problems. Dead batteries, wrong settings, or failed thermostats make people think their heating system broke when the furnace itself works fine. We check that first before diving into more complex diagnostics.
Yes. We repair all residential heating systems—gas furnaces, electric furnaces, heat pumps, boilers, radiant systems, and ductless mini-splits from every major manufacturer. That includes Carrier, Trane, Lennox, Rheem, Goodman, York, Amana, Bryant, Daikin, and Mitsubishi among others.
Most Elverta homes have either gas furnaces or heat pumps, with some older properties running electric resistance heat or boilers. We carry parts for the most common systems in Sacramento County, which covers about 80% of repairs without ordering anything. Less common systems might require a part order, but we’ll tell you that upfront along with the expected timeline.
Our technicians get trained on new systems regularly because manufacturers change designs, control boards, and components every few years. A Carrier furnace from 2010 has different parts than a 2024 model, and we need to know both. That’s especially important in established neighborhoods like Elverta where you’ll find 30-year-old systems running alongside brand-new installs.
If you’ve got a weird system—old gravity furnace, custom radiant setup, imported boiler—call us anyway. We’ve probably seen it, and if we haven’t, we’ll tell you honestly rather than guess our way through a repair.
Sacramento’s mild winters make people skip furnace maintenance, but that’s exactly why systems fail here. You’ll run your heat sporadically—cold nights in November, warm days in December, freezing mornings in January—and that on-again, off-again cycling stresses components more than consistent use.
Annual maintenance should happen in early fall before you need heat regularly. A proper tune-up includes cleaning the burner assembly and flame sensor, checking the heat exchanger for cracks, testing the igniter, inspecting electrical connections, measuring gas pressure, verifying proper airflow, and testing safety controls including the limit switch and rollout sensors.
We also check your filter, but you should change that yourself every one to three months depending on dust levels and whether you have pets. Sacramento’s air quality means filters clog faster than in many areas. A dirty filter makes your furnace work harder, raises your energy bill, and can cause the system to overheat and shut down.
Skipping maintenance doesn’t mean your furnace will definitely break, but it dramatically increases the odds. Well-maintained systems in Sacramento County regularly hit 25 to 30 years. Neglected ones start having problems around 12 to 15 years. The $150 to $200 you spend on annual maintenance typically prevents a $400 repair, and it keeps your system running efficiently so you’re not heating your house with a furnace that’s working at 70% capacity and burning extra gas to compensate.
Local Resources
Useful Links
Other Services we provide in Elverta
